CONNECTORIZED DATA BUS COUPLERS

Data Bus Coupler is the electronic module where the connection(s) between the Stub(s)/ Node(s) and the Data Bus are made. It consists of Bus In, Bus out connections and at least one stub connection. The stub connection is made using a coupling transformer and two fault isolation resistors on the Data Bus end. 

The Couplers with connectors directly attached to the Coupler box/case are known as Connectorized Data Bus Couplers.

The purpose of the Data Bus Couplers is to prevent a short on a single stub from shorting the main Data Bus i.e. to isolate the main Bus from the terminals, to reduce reflections and maintain signal impedance levels.

Compupower provides Connectorized Data Bus Couplers with Single, Dual, Four and Six Stubs. These Couplers are available with and without internal terminations.
 
All resistors are 1Watt per MIL-R-39007 and mounted away from the transformer to minimize heating effects.  The transformers are manufactured to MIL-T-21038. 

All Couplers are 100% tested and certified. 

Features:                  

• 1Watt Isolation resistors
• 1Watt Terminating resistors
• -55°C to +125°C operating temperature.

Benefits:

• Qualified  and type approved for flight applications
• Low cost
• Highly reliable
• Fast delivery

Electrical specifications:

Ordering information